Variline 15H swimming pool pumps
Variable speed filtration pumps suitable for swimming pools up to 75 m³, with a power of 1.5 HP and hydraulic connections of 1.5 ".
Variline 15H filtration pumps for swimming pools
Since 2020, Poolex proposes a new range of products to maximize your heat pump performance.
The Variline variable-speed filter pump offers a number of advantages making it your POOLEX heat pump's next best friend:
- Maximizing your heat pump output thanks to a 24/7 low flow operating function, and enabling a quicker rise in temperature and a better energy-efficient maintenance of the pre-set temperature. Up to 80% of energy saved depending on use.
- Its 4 programmable speeds are useful in adjusting the filtration flow according to the season and pool usage, be it off-season/peak periods, after schock treatment ou when backwash. Programming the flow at the touch of a button on the control pannel makes pool maintenance so much easier!
- From another standpoint, a low flow has the advantage of allowing the sand filter to work more in depth and avoid clogging.
So we can enclose the advantages in the following points:
- Optimize the performance of your heat pump
- Quiet below 45 dB
- Also compatible to replace other models of other brands
- Equipped with 4 programmable variable speeds
- Digital control panel
Why use a variable speed filtration pump?
Your filtration pump transfers your pool water through the filter and through your heat pump. However, the output levels may vary depending on swimming periods and pool treatment.
Running a variable speed pump at 50% for 24 hours instead of an On / Off pump for 8 hours saves approximately 80% energy.
At a slow speed, sound levels are divided by 4 compared to a constant-speed pump.
As water passes more slowly through the filter, filtering is improved and the filter does not become clogged as quickly.
As the motor and compressor do not run continually at full capacity, they are used less, heat less and wear less quickly.
Variline 15H filtration pumps technical details
Suitable for pools up to 75 m³
Power: 1.5 HP
Hydraulic connectors: Ø 1.5 "x1.5"
Synchronous type motor with permanent magnets
Speed modulation from 450 to 3450 RPM
Flow rate at about 10 meters of 17.5 m³ / h
Maximum flow rate of 21 m³ / h
Maximum head distance 22 meters
Power supply Single-phase 230 V - 50 Hz
Dimensions in mm (LxWxH): 596x270x306
Maximum absorbed electrical voltage of 5.5 A
3 YEARS warranty
4 other products in the same category: